National Air Cool System
National Air Cool System
Hyderabad, Telangana
Send SMS
Send E-mail

Chiller Air Conditioners

Leading Authorized Wholesale Dealer of carrier aquaedge water cooled chiller, carrier 30xv air cooled chiller and toshiba water cooled chiller from Hyderabad.
Get CALLBACK

Carrier AquaEdge Water Cooled Chiller

Carrier AquaEdge Water Cooled Chiller
 
Get Best Quote
Approx. Rs 1.5 Lakh / UnitGet Latest Price

Product Details:
Minimum Order Quantity1 Unit
PhaseThree Phase
Temperature15 - 45 deg C
BrandCarrier
MaterialSteel
Power SourceElectric
Frequency50-60 Hz
UsageIndustrial
Nominal Capacity250-550 Ton
Heat Exchanger30 to 32
Length with Nozzle in Head Waterbox4172 mm

The 23XRV chiller is the world’s first integrated variable-speed, water cooled, screw chiller. The 23XRV incorporates significant breakthroughs in water-cooled chiller technology to provide excellent reliability and achieve superior efficiency at true operating conditions without compromising the environment. Quality design and construction make the AquaEdge® 23XRV chillers the best choice for modern, efficient chilled water plants.Carrier's AquaEdge® chillers offer the best value in high-efficiency chlorine-free variable-speed screw HVAC chillers.
Performance Features:
  • IPLV to 0.299
  • Chlorine-free HFC-134a refrigerant
  • Full Load kW/Ton to 0.53
  • Tri-rotor, positive displacement screw compressor
  • Hermetic compressor motor
  • Refrigerant-cooled, unit-mounted variable frequency drive
  • Low inrush current
  • Operation of up to 0.99 power factor
  • Flooded shell-and-tube cooler
  • Float valve
  • Superior oil management/cold condenser water operation
  • Internally and externally enhanced 0.025 in. (0.635 mm) copper tubing
  • 150 psig (1034 kPa) rated cooler and condenser
  • LCD control display
  • Microprocessor-based Product Integrated Control (PIC) III
  • Multilingual display
  • Demand limiting capability with Carrier Comfort Network® (CCN) communication link
 Reliability Features:
  • ASME constructed heat exchangers
  • PED/CE construction option
  • Low voltage control circuits
  • Lowest industry refrigerant leakage rate at less than 0.1%
  • Hermetically sealed compressor motor
  • Automated controls may be tested before start-up
  • 65K AIC circuit breaker
 Maintenance Features:
  • Password protected extensive service menu with built-in diagnostic capabilities, troubleshooting, and corrective action recommendations for preset alarms
  • Alarm and alert files maintain the last 25 time and date stamped messages in memory
  • Configuration data backup with non-volatile memory
  • Refrigerant filter isolation valves
  • Thermistor type temperature sensor with quick connects in each water nozzle
  • Service contract available
 Installation Features:
  • Modular construction
  • Single point electrical connection
  • Can be dismantled and reassembled
  • Unit-mounted VFD with single point connection
  • Small footprint
 Factory-Installed Options: 
  • Enhanced tubing, .028 or .035 in. (0.711 or 0.889 mm):
    • Internally/externally enhanced copper tubing - cooler/condenser
    • Internally/externally enhanced cupronickel tubing - condenser
    • Smooth bore/externally enhanced copper tubing - cooler/condenser
    • Smooth bore/externally enhanced cupronickel tubing - condenser
  • Wall tubes, titanium, condenser, .025 or .028 in. (0.635 or 0.711 mm):
    • Internally enhanced tubes
    • Smooth bore tubes
  • Marine waterboxes (available for heat exchanger frames 3-5 only):
    • 150 psig (1034 kPa) waterbox
    • 300 psig (2068 kPa) waterbox
  • Nozzle-in-head waterbox, 300 psig (2068 kPa)
  • Hinged waterboxes
  • Flanged cooler and/or condenser waterbox nozzles
  • One, 2, or 3 pass cooler or condenser waterside construction
  • Zinc anodes
  • 100K AIC high interrupt circuit breaker with shunt trip
  • Analog voltmeter and ammeter with 3-phase selector switch
  • DataLINK™ or DataPort™ communication device
  • Shipped factory charged with refrigerant
  • Hot gas bypass
  • Full cold surface thermal insulation (except waterbox covers)
  • Customer factory performance testing
 

    Additional Information:
    • Item Code: 23XRV
    Yes! I am Interested
    View PDF
    Get CALLBACK

    Carrier 30XV Air Cooled Chiller

    Carrier 30XV Air Cooled Chiller
     
    Get Best Quote
    Approx. Rs 2 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    PhaseThree Phase
    Capacity11 TR, 50 TR
    BrandCarrier
    MaterialSteel
    ambient Temperatures-29 to 55 deg C
    Frequency50 Hz
    Usage Industrial Use

    The Carrier® AquaForce® 30XV air-cooled variable-speed screw chiller was developed to ensure the best performance and efficiency in a solution that’s easy to install, easy to service, highly reliable and quiet. The 30XV delivers with industry-leading efficiency (IPLV Ratings greater than 21.0 available in certain models) and sound.  The smaller footprint 30XV can replace just about all older equipment going back two generations.  It is designed for tomorrow, and fit for today.  The 30XV can be customized to fit most building needs, anywhere. With value-added features such as fully air-cooled variable frequency drives and next generation sub-systems including rotary screw compressors and quiet AeroAcoustic® fan system, integrated with microchannel condenser coils, the 30XV is made for versatility, robustness, and efficiency. Its user-friendly control with the color touchscreen display is self-optimizing, enabling the 30XV to run at optimum performance at any given set of conditions.

    Performance Features:
    • Full-load EER values above 11.0 and IPLV values above 21.0
    • Tiered approach providing from the smallest footprint to the best in class efficiency 
    • ASHRAE 90.1-2013 compliant / AHRI certified
    • Operation from -20 F to 125 F ambient conditions
    • High-efficiency variable speed screw compressors
    • Standard uncoated or optional e-coated Novation® microchannel heat exchanger (MCHX) condenser coils (factory-installed option)
    • Standard 25kA SCCR rating for all voltages (Except 575V, 10kA)

    Maintenance Features:
    • Over 15 diagnostic functions & trending capability 
    • Permanently lubricated fan motor bearings
    • Compressor suction service valves (factory-installed option)
    • Microchannel condenser coils with inherent corrosion resistance and offering simplified cleaning (factory-installed option)
    • Unit-mounted, non-fused disconnect (factory-installed option)
    • Remote service port for easier machine diagnostics (factory-installed option or field-installed accessory)
     Installation Features:
    • Factory charged with R-134a refrigerant
    • GFI (ground fault interrupter) convenience outlet (factory-installed option or field-installed accessory)
    • Remote evaporator kit (field-installed accessory)
    • Single or dual-point electrical connections available (factory-installed option)
    • Control transformer (factory-installed option)
    • Structurally robust base
     Factory-Installed Options:
    • Low-Sound
    • Sound Optimization
    • Condenser Coil Options
    • E-Coated Micro Channel
    • Al/Cu Fins 
      • Pre-coated Al/Cu Fins
      • Cu/Cu Coils
      • E-Coated Al/Cu Coils
      • E-Coated Cu/Cu Coils 
    • Isolation Valve
    • Suction Line Insulation
    • Energy Management Module (EMM) + GFI
    • Chilled Water Temperature Reset (via 4-20 mA Signal; EMM Required)
    • Demand Limit (via 4-20 mA signal, 2 addition steps; EMM Required)
    • Variable Speed Condenser Fans
    • BACnet Translator (MS/TP)
    • LONworks Translator
    • Dual Point Primary Power Entry 
    • Control Transformer
    • Unit Mounted Main Disconnect, Non-fused
    • High SCCR
    • Condenser Coil Trim Panels
    • Security Grilles
    • Hail Guards
    • Full Hail Guards
    • Skid & Bag

    Additional Information:
    • Item Code: 30XV
    Yes! I am Interested
    View PDF
    Get CALLBACK

    Toshiba Water Cooled Chiller

    Toshiba Water Cooled Chiller
     
    Get Best Quote
    Approx. Rs 2 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    BrandToshiba
    CompressorSemi-Sealed
    TypeAir-Cooled
    Nominal Cooling Capacity12.73 kW
    At Water Temperature+15 deg C
    Control Range+8 deg C to + 30 deg C
    Compressor Drive3.68 Kw
    Compressor Amps8.30 A
    Power supply415 V,50Hz ,3 Phase+N
    Control voltage24VDC
    Tank capacity75-400 lts
    Condensor Pump Flow50-240 Lpm
    Water Connection1 1/2 inch BSP
    Make up water Connection3/4 inch
    Process Pump Flow130-500 Lpm
    Process Pump Pressure5.5-
    Process Pump Drive2.2 Kw
    Pump Amps7.7-14.4
    Total connected load7.00 Kw
    Dimensions800 x 1400 x 1200 mm
    Unit Weight400 kg
    Water7.0 ph
    Control UnitPLC / Microprocessor

    Toshiba Machine offers various types of chillers (Air cooled / water cooled) for different plastics processing and industrial applications. These chillers are Energy efficient and compact, suitable for working in high ambient conditions and for a variety of processing applications including PP and PET. The chillers are fitted with microprocessor/PLC based controller with digital indication and are available in a range of cooling capacity from 3.5 TR to 40 TR

    Method of Cooling in Toshiba Machine Chillers:
    Water flows through Shell and Tube with immersion type evaporator and maintains water at required temperature inside the the inbuilt SS tank. Separate process Pump will circulate water to the process and returned to the tank. Process pump, internal circulation pump, Heat Exchanger are housed in the chiller and controlled by PLC / Microprocessor.
    Salient Features of Features Toshiba Machine Air Cooled Chillers:
    • High Pressure & Low-Pressure Trip
    • High Voltage Trip & Low Voltage Trip
    • Overload Trip for fan, processes pump
    • Low-Temperature Anti-Freeze Safety Thermostat
    • Safety pressure switch for process pump
    • Internal Over Load Trip for Compressor
    • Glass with moisture indicator
    • Single phase & phase reversal preventer, MCB for Fan Motor
    • Manual Bypass valve
    • Energy efficient Shell & Tube with immersion type Evaporator
    • Indications for Pump, Compressor, Fan ON/OFF, Programmable digital controller, Common Light indication with Alarm

    Refrigerants circuit add-ons:
    • Accumulator
    • Liquid receiver from 12.5 TR onwards
    • High/Low pressure Gauges
    • Filter dryer
    • Slight Glass with Moisture Indicator

    Features:
    • High Pressure & Low Pressure Trip
    • High Voltage Trip & Low Voltage Trip
    • Overload Trip for fan, processes pump
    • Low Temperature Anti-Freeze Safety Thermostat
    • Safety pressure switch for process pump
    • Internal Over  Load Trip for Compressor
    • Glass with moisture indicator
    • Single phase & phase reversal preventer, MCB for Fan Motor
    • Manual By pass valve
    • Energy efficient Shell & Tube with immersion type Evaporator
     Method of Cooling:Internal circulation pump will circuit water through Shell and Tube Condensor and maintains water at required tem
    -
    perature inside the inbuilt SS tank.  Separate process Pump will circulate water to the process and returned to the
    tank.  Process pump, Internal circulation pump, Heat Exchanger etc... are housed in the chiller and controlled by PLC /
    Microprocessor.
     Indications:
    • Pump , Compressor, Condenser ON/OFF
    • Programmable digital controller
    • Common Light indication with Alarm
     Refrigerants Circuit add ons:
    • Accumulator
    • Liquid receiver from 12.5 TR onwards
    • High/Low pressure Gauges
    • Filter dryer
    • Slight Glass with Moisture Indicator
    Yes! I am Interested
    View PDF
    Explore More Products
    X
    Find Us Mirza Hyder Baig (Managing Director) 5-9-60, Inside Moghal Court Opposite Nizam College, Abids, Hyderabad - 500029, Telangana, India
    SEND SMS
    SEND E-MAIL
    Share Us: